ar4910d7140a

Remove, install exhaust system

Type ar · emne 49.10 · version 0102 · 2001-07-20

Gælder for: ENGINE 611.981 /987 in MODELS 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODELS 902.6, 903.6, 904.6 ENGINE 611.983 in MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 611 (modeller 981, 983, 987) · Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 611 (modeller 981, 983, 987) · Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

Gælder også for motorer/gearkasser: 612 981

AR49.10-D-7140A

Remove, install exhaust system

17.6.99

ENGINE 611.981 /987 in MODELS 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODELS 902.6, 903.6, 904.6

ENGINE 611.983 in MODEL 690.6

Remove, install exhaust system

D49.10-0010-06

1 Heat shield

2 Clip

3 Nut

4 Bracket

5 Bolt

6 Exhaust pipe

7 Muffler

8 Clip

9 Rubber hanger

10 Turbocharger

Remove/install

1

Remove heat shield (1)

2

Take off clip (2) at turbocharger (10)

3

Unscrew nuts (3) at bracket (4)

Installation: Replace self-locking nuts

4

Unscrew bolt (5) at front exhaust hanger

5

Detach exhaust system from rubber hangers (9) and take off complete

Installation: Inspect condition of rubber hangers (9), replace if necessary

If necessary, separate exhaust pipe and exhaust muffler (6, 7) and replace separately. Replace collar clamp (8)

6

Install in the reverse order