ar4900p100005mfc

Remove/install heat shield of drive shaft on front axle

Type ar · emne 49.00 · version 0201 · 2019-11-14

Gælder for: Engine 260 in model 118, 177, 247

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.00 Generelt — Serie 118 · Serie 177 · Serie 247

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.40 Dæmpning/afskærmning/isoleringsmåtte — Serie 118 · Serie 177 · Serie 247

Gælder også for motorer/gearkasser: 260 ***

AR49.00-P-1000-05MFC

Remove/install heat shield of drive shaft on front axle

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Engine

260 in model 118, 177, 247

Engine support (engine side)

Number

Designation

Engine 260

BA22.10-P-1002-02E

Bolt, heat shield to engine carrier/crankcase/oil pan/cylinder head

M6

Nm

8

Remove/install heat shield of drive shaft on front axle

P49.00-2215-09

1

Remove screws (1) and remove heat shield (2) with retaining clamp (3)   .

2

Install in the reverse order.

Henviste dokumenter