ar4720t1070ba

Remove/install main fuel filter

Type ar · emne 47.20 · version 0104 · 2010-01-29

Gælder for: ENGINES 457.944 in model NMB613.358 /388

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.20 Brændstofpumpe, filter — Serie 613 (modeller 358, 388)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.41 filter/vandudskiller — Serie 613 (modeller 358, 388)

Gælder også for motorer/gearkasser: 457 944

AR47.20-T-1070BA

Remove/install main fuel filter

19.1.10

ENGINES 457.944 in model NMB613.358 /388

Remove/install main fuel filter

T47.20-0023-06

1 Filter housing cover

2 Main fuel filter

3 Fuel pipe

4 Sealing ring

5 Fuel pipe

6 Fuel pipe

7 Fuel pipe

8 Sealing ring

9 Main fuel filter housing

17 Screw

Remove/install

1

Open liftgate

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

2

Remove filter housing cover (1) with main fuel filter (2)

Replace fuel filter

Only perform operation steps for removal/installation of the lid. Do not replace the filter.

AP47.20-T-0780BB

3

Disconnect fuel line (3)

Collect escaping fuel.

Installation: Install new sealing rings (4).

*BA47.25-N-1003-01H

4

Remove fuel lines (5, 6, 7)

Collect escaping fuel.

Installation: Install new sealing rings (8).

*BA47.25-N-1004-01H

5

Remove bolts (17) and detach main fuel filter housing (9)

*BA47.25-N-1005-01H

6

Install in the reverse order

7

Bleed fuel system

Bleed fuel system

AP47.00-T-1720-01BB

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Start engine and inspect fuel system for leaks

If the engine does not start after 30 s, wait
1 min. before repeating attempt at starting.

9

Turn off engine

10

Close engine compartment flap at rear

Fuel pipes/hoses

Number

Designation

Engine 457.9

BA47.25-N-1003-01H

Banjo bolt, fuel line/
leak fuel line to banjo bolt

Nm

15

BA47.25-N-1004-01H

Banjo bolt, fuel line to fuel filter housing

Nm

50

BA47.25-N-1005-01H

Bolt, fuel filter housing to bracket

Nm

25

Henviste dokumenter