ar4710t7000b

Remove/install fuel gage sensor

Type ar · emne 47.10 · version 0101 · 2005-07-12

Gælder for: MODEL 613.355 /358 /388 /455 /485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.10 Brændstoftank — Serie 613 (modeller 355, 358, 388, 455, 485)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.12 Sensor/kontakt/ledningssæt — Serie 613 (modeller 355, 358, 388, 455, 485)

AR47.10-T-7000B

Remove/install fuel gage sensor

21.3.00

MODEL 613.355 /358 /388 /455 /485

Remove/install fuel gage sensor

T47.10-0006-01

1 Electrical lead

2 Screw

3 Fuel gage sensor

Remove/install

1

Switch off ignition

2

Remove trim panel of fuel tank

Only on right hand side of vehicle.

AR88.60-T-5910B

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

3

Pump out fuel

AR47.10-T-4001B

4

Disconnect electric cables (1)

Installation: Note position of electrical cables (1).

The ground conductor is fixed with a bolt (2).

5

Unscrew bolts (2) and remove fuel gage sender (3)

Inspect seal, replace if necessary.

Ensure the sensor is correctly installed.

6

Install in the reverse order

Henviste dokumenter