AR47.10-D-0012B | Removing and installing solenoids on the multiple valve | 18.12.03 |
ENGINE 111.984
For liquified gas system with compressed-gas tank 65 liter and 95 liter on frame at rear of rear axle
D47.10-1120-06
1 Pressurized gas reservoir
2 Bolt
3 Cover
4 Nut
5 Clip
6 Tie strap
7 Rubber grommet
8 Protective hose
9 Bolt
10 Nut
11 Solenoid
12 Electrical connector
| Removing/installing | ||
1 | Switch off ignition | ||
2 | Push back grommet (7) about 20 cm | ||
3 | Remove clamp (5) on bracket for compressed-gas tank | ||
4 | Remove protective grille | ||
5 | Attach hydraulic transmission jack to compressed-gas tank and raise slightly | Secure compressed-gas tank on hydraulic jack with a strap or ask an assistant to hold it. | |
6 | Remove compressed-gas tank (1) on bracket | ||
7 | Lower compressed-gas tank by about 30 cm | Installation: Ensure that the fastening bolts are fitted correctly. | |
8 | Unscrew bolts (2) and push back cover (3) | Installation: Recut thread on the three brackets. | |
9 | Disconnect electrical connector (12) | ||
10 | Unscrew nut (10) and remove solenoid (11) | | |
11 | Install in reverse order |
Compressed-gas tank, gas shutoff valve