ar4640t020001b

Press off, refit track rod on track arm

Type ar · emne 46.40 · version 0103 · 2006-07-26

Gælder for: MODEL NMB613.355 /358 /388 /455 /485 with STEERING 765.860 MODEL NMB613.364 /365 Lenkung ZF 8098 MODEL NMB613.358 /388 with STEERING 766.376

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.40 Styrestænger — Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.43 svingarm/styrestang/sporstang/dæmper — Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

Gælder også for motorer/gearkasser: 765 860, 766 376

AR46.40-T-0200-01B

Press off, refit track rod on track arm

Track rod

Number

Designation

Steering 765.860

Steering 766.376

BA46.40-N-1001-01B

Castellated nut, tie rod to lever

Nm

285

265

Press off, refit track rod on track arm

Torque wrench

000 589 10 99 01

Commercially available tools

Number

Designation

WH58.30-Z-1022-17A

Press for removing ball joints

Press off, refit track rod on track arm

T46.40-0011-01

Detaching

1 Remove the split pin in the castellated nut.

2 Loosen castle nut and unscrew until it is flush with the end of the thread of the tie rod end.

3 Pry the tie rod end off the track lever using the press out tool.

4 Unscrew the castellated nut.

Shown on model 613.355/455/485

Attaching

5 Hang the track rod on the track arm.

6 Screw on the castle nut and tighten to the specified torque .

7 Install the locking cotter pin of the castle nut.

Use a new cotter pin.