Shown on right side of vehicle |
1 | Outer clamp |
2 | Boot |
3 | Inner clamp |
4 | Jam nut, tie rod |
N46.40-2043-01
S46.40-4502-01
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
| Remove/install | ||
1 | Remove ball socket | ||
2 | Remove outer clamp (1) | If necessary, replace outer clamp (1). | |
3 | Remove inner clamp (3) | Replace inner clamp (3). | |
4 | Remove boot (2) | Check boot (2) for damage and replace if necessary. | |
Installation: Make sure boot (2) is correctly seated. | |||
5 | Install in the reverse order |
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ar4640s7242s
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)