Remove/install track rod · ar4640p0200ak · Mercedes-Benz WIS

AR46.40-P-0200AK

Remove/install track rod

17.3.11

MODEL 169.0/ 3

MODEL 245.2 (except 245.286)

P46.40-2059-11

Illustrated on model 169.031

1 Inner track rod

2 Nut

3 Nut

4 Pin

5 Boot

6 Tie rod

7 Steering knuckle

Modification notes

12.2.07

Puller 601 589 04 33 00 replaced by 221 589 00 33 00

Operation step 4

 	Remove/install
1	Remove front wheel
	Remove/install wheels, rotate if necessary		AP40.10-P-4050AK
2	Loosen nut (2) on the inner tie rod (1)	 After loosening, do not twist the nut (2) anymore on the inner tie rod (1).
			*BA46.40-P-1002-01J
3	Unscrew the nut (3) from the bolt (4) of the tie rod (6)	 Replace self-locking nut (3).
		 Counterhold bolt (4) using a suitable tool.
			*BA46.40-P-1001-01J
4	Pry tie rod (6) off steering knuckle (7)	 Do not damage boot (5) when prying off, otherwise the tie rod (6) has to be replaced.
			*171589003400
			*221589003300
			*163589034300
5	Unscrew tie rod (6) from inner tie rod (1)	 Installation: Screw on tie rod (6) up to the nut (2).
6	Install in the reverse order
7	Perform wheel alignment check		AR40.20-P-0200AK

 Tie rod

Number	Designation		Model 169	Model 245


BA46.40-P-1001-01J	Self-locking nut, tie rod to steering knuckle	Nm	60	60
BA46.40-P-1002-01J	Jam nut, track rod	Nm	60	60

221 589 00 33 00

Press

Puller

Thrust piece

171 589 00 34 00

163 589 03 43 00