Serier
da
ar4640b020001a
Press off, refit track rod on track arm
Type ar · emne 46.40 · version 0102 · 2020-03-14
Gælder for: Steering gear 766.4/5 in model 368, 382, 384, 688 Steering gear 766.4/5 in model 384, 693, 694, 695 Steering gear 766.4/5 in model 688, 958.1 Steering gear 766.4/5 in model 693, 695, 696
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 46 Styretøj › 46.40 Styrestænger — Serie 368 · Serie 382 · Serie 384 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 958 (modeller 1**)
EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.43 svingarm/styrestang/sporstang/dæmper — Serie 368 · Serie 382 · Serie 384 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 958 (modeller 1**)
Gælder også for motorer/gearkasser: 766 4**, 766 5**
AR46.40-B-0200-01A
Press off, refit track rod on track arm
Steering gear
766.4/5 in model 368, 382, 384, 688
Steering gear
766.4/5 in model 384, 693, 694, 695
Steering gear
766.4/5 in model 688, 958.1
Steering gear
766.4/5 in model 693, 695, 696
Number
Designation
Type 693, 696 with front axle 739.39
BA46.40-B-1001-01A
Ball joints castle nut for the tie-rod
M18x1.5
Nm
190
M20x1.5
Nm
240
M24x1.5
Nm
300
M27x1.5
Nm
360
1
Remove the locking pin (1).
2
Loosen and remove castle nut (2).
3
With the aid of the extractor draw the connection bar (4) from the connection arm (3).
Do not damage the rubber caul.
Remove
4
Fit connection bar (4) into connection arm (3).
5
Screw the castle nut (2) .
6
Lock the castellated nut (2) with a new locking pin (1).
To install the locking pin, do not loosen the castellated nut.
Install
