ar4630g0500us

Remove/install power steering pump

Type ar · emne 46.30 · version 0201 · 2018-08-08

Gælder for: Model 405 with engine 936.97

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.30 Servopumpe — Serie 405 · Serie 936 (modeller 97*)

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.31 Servopumpe/oliebeholder/filter — Serie 405 · Serie 936 (modeller 97*)

AR46.30-G-0500US

Remove/install power steering pump

07.08.2018

Model

405 with engine 936.97

Remove/install power steering pump

1

Pressure line

2

Clip

3

Power steering pump

4

Bolts

5

Hydraulic hose

G46.30-3119-75

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Remove/install

1

Tilt cab into repair position

AR60.80-G-0005B

2

Remove clamp (2) of pressure line (1) from bracket

3

Unfasten clamp on hydraulic hose (5)

4

Detach hydraulic hose (5) from power steering pump (3)

Collect escaping oil in suitable container.

5

Detach pressure line (1) from connection fitting of power steering pump (3)

Pressure line to power steering pump

*BA46.30-N-1004-01K

6

Remove bolts (4)

Installation: Tighten bolts (4) evenly.

Bolt, power steering pump to compressor

*BA46.30-N-1001-01K

7

Remove power steering pump (3)

Collect escaping oil in suitable container.

Installation: Replace seal between power steering pump (3) and compressor.
Mount seal only once the power steering pump (3) has been positioned between the engine and the frame.

8

Remove both connection fittings from power steering pump (3)

If the power steering pump (3) is to be replaced.

Suction line to power steering pump

*BA46.30-N-1005-01K

Threaded fitting to power-steering pump

*BA46.30-N-1006-01K

Clean

9

Clean sealing surfaces on power steering pump (3) and compressor

10

Install in the reverse order

11

Pour in steering gear oil and bleed steering

AP46.00-G-4611UG

Power steering pump

Number

Designation

Model 405 with engine 934.9, 936.9

BA46.30-N-1001-01K

Bolt, power steering pump to compressor

Nm

50

Power steering pump

Number

Designation

Model 405 with engine 934.9, 936.9

BA46.30-N-1004-01K

Pressure line to power steering pump

Nm

70

Power steering pump

Number

Designation

Model 405 with engine 934.9, 936.9

BA46.30-N-1005-01K

Suction line to power steering pump

Nm

115

Power steering pump

Number

Designation

Model 405 with engine 934.9, 936.9

BA46.30-N-1006-01K

Threaded fitting to power-steering pump

M16x1.5

Nm

–

M18x1.5

Nm

50

M26x1.5

Nm

95

Henviste dokumenter