ar4625g3100c

Remove / install hydraulic limiter

Type ar · emne 46.25 · version 0105 · 2012-02-21

Gælder for: MODEL 437.420 /425 /430 /435 ## up to 205845 steering LS 6 E (765.863)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.25 Hydraulisk/elektrohydraulisk styretøj — Serie 437 (modeller 420, 425, 430, 435)

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.42 Styretøj/styreaksel — Serie 437 (modeller 420, 425, 430, 435)

AR46.25-G-3100C

Remove / install hydraulic limiter

15.2.12

MODEL 437.420 /425 /430 /435 ## up to 205845
steering LS 6 E (765.863)

Remove / install hydraulic limiter

G46.25-3110-01

1 Right end limiting adjustment screw (marked with "R")

2 Adjusting bolt, left-hand limiter (marked with "L")

Removing

1

Remove locking plate

2

Remove hydraulic pressure reduction valves (1, 2)

For safety reasons, the limiter adjusting screws (1, 2) must be not be unscrewed while the engine is running.
The hydraulic pressure reduction valves (1, 2) are under pressure.

Install

3

Install hydraulic pressure reduction valves (1, 2)

4

Check and adjust hydraulic limiter

AR46.25-G-3090C

5

Install locking plate

*BA46.20-N-1005-01G

Steering gear

Number

Designation

Steering
765.863 in model 427, 436, 437

BA46.20-N-1005-01G

Retainer for pressure reduction valves to steering gear

Nm

10

Henviste dokumenter