ar4625g3070b

Remove/install adjusting screw of hydraulic limiter

Type ar · emne 46.25 · version 0109 · 2010-05-11

Gælder for: MODEL 405.050 /100 /101 /102 /103 /120 /121 /122 /123 /200 /201 /220 /221 With steering LS6BK

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.25 Hydraulisk/elektrohydraulisk styretøj — Serie 405 (modeller 050, 100, 101, 102, 103, 120, 121, 122, 123, 200, 201, 220, 221)

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.42 Styretøj/styreaksel — Serie 405 (modeller 050, 100, 101, 102, 103, 120, 121, 122, 123, 200, 201, 220, 221)

AR46.25-G-3070B

Remove/install adjusting screw of hydraulic limiter

5.5.10

MODEL 405.050 /100 /101 /102 /103 /120 /121 /122 /123 /200 /201 /220 /221
With steering LS6BK

Remove/install adjusting screw of hydraulic limiter

G46.20-3103-01

3 Adjusting bolt, left-hand limiter (marked with "L")

4 Adjusting screw of right limiter (marked with "R")

5 Jam nut

Removing

1

Slacken jam nuts (5) on the adjusting screws (3, 4)

2

Remove adjusting screws (3, 4)

For safety reasons the adjusting screws (3, 4) must not be unscrewed when the engine is running.
The steering system is pressurized.

Install

3

Install adjusting screws (3, 4)

Tighten adjusting screws (3, 4) to a maximum of 5 Nm.

4

Tighten jam nuts (5) of adjusting screws (3, 4)

*BA46.20-N-1008-01G

5

Check and adjust hydraulic limiter

AR46.25-G-3090B

Steering gear

Number

Designation

Steering LS6BK in model 405.05/10/12/
20/22

BA46.20-N-1008-01G

Lock nut on end limiting adjustment screw

Nm

38

Henviste dokumenter