AR46.20-B-0300TA | Remove/install side housing cover on steering gear | 12.02.16 |
Steering gear 765.82, 765.83 with Vehicle 958
W46.20-1025-05
Represented in the steering 765.84
1 Housing cover
2 Steering shaft
3 Oil reservoir
4 Oil line
5 Oil line
6 Counter-nut
| Remove | ||
Danger! | Risk of injury on skin and eyes by hydraulic fluid expelled under high pressure. Risk of poisoning by hydraulic fluid ingestion. | Before starting to work in the hydraulic system, release the system's pressure. Wear protective clothes and safety goggles. | |
1 | Lift the vehicle by its front axle and support on safety stands | The wheels must be suspended. | |
2 | Turn the steering wheel to the left against stop | ||
Danger! | Risk of injury by pinching and crushing when tilting the cab | During cab tilting nobody is allowed to remain in the tilting area. Always tilt the cab to its final position and latch. | |
3 | Tilt the cab. | Indications on cab tilting | |
4 | Reading the steering box bar code | ||
| Decipher the steering box serial number through the bar code sticker | ||
5 | Remove the driver's side running-board | ||
6 | Remove the oil lines (4, 5), the support and the oil reservoir (3) on the steering box | Catch the hydraulic oil running out. Plug the openings on the oil lines and on the steering box. | |
7 | Remove the housing cover (1) with O-Ring and sealing ring from the steering box | ||
| |||
| Installing | ||
8 | Install a new housing cover (1) with O-Ring and sealing ring in the steering box | In steering assembly work, thorough cleansing is indispensable. Only lint-free rags or paper towels are to be used for cleaning work. | |
| |||
| |||
Omnifit FD 3041 sealing compound | |||
General use MB grease | |||
| Listing of steering type, parts number and steering box end number | ||
9 | Put the steering in center position | ||
10 | Adjust the steering shaft (2) play on the work piston | ||
| |||
| |||
11 | Install the oil lines (4, 5), the support and the oil reservoir (3) on the steering box | Check the oil lines and clamps for wear. If necessary, replace. | |
| |||
12 | Steering bleeding | ||
13 | Lower the vehicle by the front axle | ||
Danger! | Risk of accident by unintentional displacement with the engine running. Risk of injury by crushing and burn on contact during engine starting procedure or with the engine running | Chock the vehicle to prevent unintentional displacement. Use closed and closely fitting work clothes. Do not touch hot or rotating parts. | |
14 | Carry out a visual steering box check for leaks | With the engine running. | |
15 | Install the running-board | ||
16 | Carry out a steering system operating check | In this check control the steering play and the return of the vehicle steering. |
Steering gear
Número | Denominação | Steering gear case 765.82 | Steering gear case 765.83 | |||
BA46.20-B-1007-01F | Counter-nut on the steering box adjusting bolt | Nm | 185 | 185 | ||
BA46.20-B-1016-01F | Cover bolt on the steering box case | Nm | 180 | 190 | ||
Hydraulic steering
Número | Denominação | Steering box 765.82/83 in Vehicle 958 | |||
BA46.25-B-1003-01C | Oil reservoir support on the steering box | 8.8 | Nm | 18 | |
001 589 80 21 00
Torque screwdriver
765 589 02 63 00
Retaining ring
765 589 03 63 00
Retaining ring
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1022-01A | Omnifit FD3042 sealing compound | A 002 989 47 20 |
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1029-06A | Grease as per DBL 6804.50 | A 001 989 34 51 |