S46.10-4553-08
Shown on model 470 |
1 | Steering wheel | 2 | Electrical connector | 3 | Center bolt |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Turn steering wheel (1) to center position | The front wheels must be in the straight-ahead position. | |
2 | Remove driver's airbag from steering wheel (1) | ||
3 | Release and disconnect electrical connection (2) | ||
4 | Counterhold steering wheel (1) and unscrew center bolt (3) | ||
Topical note | Notes on self-locking nuts and bolts | ||
Helper required. | |||
Screw/bolt, steering wheel to steering shaft | |||
5 | Remove steering wheel (1) | Installation: Assign marking on serrations in steering wheel (1) to marking on steering shaft. | |
6 | Install in the reverse order | ||
7 | Perform function test of horns and steering wheel buttons (1) | ||
8 | Perform function test of vibration motor on steering wheel using diagnostic system | Model 470, 471 | |
| |||
Select the following menu items: Diagnosis Control units Steering wheel electronics (N135) Steering wheel vibration motor (M99) Actuations Perform actuation. |
Henviste dokumenter
- ad0000s200006p
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar9160s0661p