ar4610d730001a
Mount universal joint to axle shaft
Type ar · emne 46.10 · version 0108 · 2005-08-30
Gælder for: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 46 Styretøj › 46.10 Rat, kapperør, styrespindel, ratlås — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)
EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.40 rat/ratstamme/styrerør/ratlås — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)
AR46.10-D-7300-01A
| Mount universal joint to axle shaft
|
|
|
Steering wheel, jacket tube, steering shaft
Number
| Designation
| Model
901, 902, 903, 904, 905
|
|
|
|
|
|
|
|
|
|
|
|
|
BA46.10-N-1003-05C
| Universal joint to steering gear shaft
|
| Nm
| 24
|
1 Fit universal joint on drive shaft and install fitted bolt.
Push down the universal joint until the hole lines up with the radial groove in the steering shaft.
If correctly mounted the distance between the lower edge of the universal joint and the transmission housing is approx. 48 mm.
