ar4330t0016el

Remove/install oil temperature sensor

Type ar · emne 43.30 · version 0100 · 2011-10-18

Gælder for: MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000452xx MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000452xx MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000452xx MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 43 Bremsepneumatik og hjælpebremser › 43.30 Retarder (hydraulisk) — Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.21 Retarder › 21.21.12 Sensor/kontakt/ledningssæt — Serie 613 (modeller 355, 358, 364, 365, 388, 455, 485)

Gælder også for motorer/gearkasser: 714 120, 714 140, 714 66*, 714 69*

AR43.30-T-0016EL

Remove/install oil temperature sensor

12.10.11

MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx

MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx

MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx

MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000452xx

Remove/install oil temperature sensor

T43.30-0082-11

1 Electrical line

2 Sealing ring

B93 Retarder oil temperature sensor

Remove/install

Danger!

Risk of injury caused by touching hot retarder and by scalding from hot retarder oil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.

AS43.30-Z-0001-01A

1

Switch off ignition

2

Unplug electrical cable (1)

3

Remove retarder oil temperature sensor (B93) from retarder housing

Installation: Install new sealing ring (2).

Collect any escaping oil.

*BA43.30-N-1012-01G

4

Install in the reverse order

5

Check/correct retarder oil level

AP43.30-T-4310EL

6

Conduct a road test

Bleed retarder:

- If present and possible:

Switch off retarder foot control.

-Drive vehicle at 50 km/h.

- Switch on retarder in first brake
stage 5

times in succession for approx. 5 s each time.

Retarder (hydraulic)

Number

Designation

Model 613
with code B10

BA43.30-N-1012-01G

Oil temperature sensor to retarder

Nm

30

Henviste dokumenter