ar4330b000302d
Installing profile ventilation in retarder housing
Type ar · emne 43.30 · version 0101 · 2020-04-01
Gælder for: Model 368.0/1, 382.1, 384.0 Model 384.0
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 43 Bremsepneumatik og hjælpebremser › 43.30 Retarder (hydraulisk) — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 0**)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.21 Retarder › 21.21.30 hus/dæksel/aksel/retarder — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 1**) · Serie 384 (modeller 0**)
AR43.30-B-0003-02D
| Installing profile ventilation in retarder housing
|
|
|
Model
| 368.0/1, 382.1, 384.0
|
Model
| 384.0
|
1
| Insert the vent valve (3) in the adapter (2) and turn the vent valve (3) until the jaws fit on the adapter (2)
|
|
| Ensure the correct fitting position of the float in the ventilation valve (3), the “O” mark must point upwards.
|
2
| Insert the ventilation valve (3) with the impact puller (1) and the adapter (2) in the retarder (4) housing.
|
|
| Ensure the correct fitting of the ventilation valve (3).
|
3
| Crimp the ventilation valve (3) carefully with the impact puller (1).
|
