Remove/install vacuum pump · ar4305p1320p · Mercedes-Benz WIS

AR43.05-P-1320P

Remove/install vacuum pump

15.2.12

MODEL 203.004 /006 /204 /206 /706 with ENGINE 611.962

MODEL 203.016 /216 with ENGINE 612.962

MODEL 209.316 with ENGINE 612.967

MODEL 203.018 /218 /718 with ENGINE 612.990

P43.05-0203-11

 	Remove/install
1.1	Remove cylinder head cover trim	Engine 611
		Bolt for trim panel of cylinder head cover on cylinder head cover	*BA01.20-P-1002-01A
		Screw attaching cover panel on charge air manifold	*BA01.20-P-1003-01A
2	Detach vacuum pipe (1) at vacuum pump (2)	 Squeeze catches (3) together and detach vacuum line (1).
3	Remove bolts attaching vacuum pump (2)		*BA43.05-P-1001-01A
4	Pull off vacuum pump (2) forwards.	 Installation: Note position of driver on rear of pump to ensure function is maintained. Replace sealing rings, clean sealing surface in order to avoid leaks.
5	Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 611.960/ 961/962	Engine 612.990


BA01.20-P-1002-01A	Bolt, trim panel of cylinder head cover to cylinder head cover	Nm	10	8
BA01.20-P-1003-01A	Bolt, charge air distribution pipe cover to charge air manifold	Nm	10	-

 Vacuum pump

Number	Designation		Model 203, 209 except engine 271, 272, 642, model 220


BA43.05-P-1001-01A	Bolt, vacuum pump to cylinder head	Nm	14