W42.10-0080-04
Only vehicles 6x2
1 Test scale
2 Support
A Distance
1 | Put all wheels vehicles on supports (2) | Supports (2) should present height by approximately 50 to 60 mm. Vehicle should be at horizontal position and rear trailing axle downwards. | |
2 | Lock the front axle to avoid involuntary movement | ||
3 | Put test scale (1) in platform | | |
4 | Position test scale (1) at the middle of traction axle and determine distance (A) | Measure and note distance (A) of the upper platform side until lower side of the axle edge. | |
5 | Lift the vehicle using a test scale (1) | To prevent damages around axle body, it is necessary to use test scale (1) to weigh unload vehicles. | |
Lift the vehicle until the traction axle wheels turn freely | |||
6 | Remove free supports (2) | ||
7 | Return the platform until marked distance (A) | ||
8 | Scanning the rear axle load in test scale | ||
9 | Move down the rear axle |
385 589 05 21 00
Test scale