Shown on model 405.201 |
1 | Compressed-air line |
2 | Return flow valve |
G42.60-3151-01
G42.60-3152-01
Shown on model 437.431 |
1 | Compressed-air line |
2 | Return flow valve |
G42.60-3153-01
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
1 | Start the engine and fill the compressed-air system until the pressure regulator cuts out | ||
2 | Turn off engine | ||
3 | Unscrew union nut from compressed air line (1) | ||
4 | Detach compressed air line (1) from connection of elbow fitting | A pressure drop in the reservoir pressure through the compressed air line (1) will usually be down to a defective return flow valve (2). | |
If there are problems | |||
| |||
Replace the return flow valve (2). | |||
| |||
5 | Fasten compressed air line (1) to connection of elbow fitting | ||
6 | Screw union nut onto compressed air line (1) | ||
7 | Operate brake pedal several times in a row to reduce reservoir pressure | If there was a leakage and the return flow valve (2) was replaced. | |
8 | Repeat test procedure | If there was a leakage and the return flow valve (2) was replaced. | |
Perform operation steps 1 to 6. |
Henviste dokumenter
- ap4260g4382b Tilbageslagsventil tryklufttørrer udskiftes
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører