Remove/install ABS measuring ring

Type ar · emne 42.30 · version 0100 · 2005-07-12

Gælder for: MODEL 613.358 /388 with REAR AXLE 746.217

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.30 Antiblokeringssystem (ABS) — Serie 613 (modeller 358, 388)

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.12 Sensor/kontakt/ledningssæt — Serie 613 (modeller 358, 388)

Gælder også for motorer/gearkasser: 746 217

AR42.30-T-0160BA

Remove/install ABS measuring ring

24.6.04

MODEL 613.358 /388 with REAR AXLE 746.217

T42.30-0014-01

 	Remove/Install
1	Remove rear wheel hub		AR35.20-T-0310BA
2	Detach ABS measuring ring from the rear wheel hub	 Using a brass punch drive the ABS measuring ring evenly off the rear wheel hub in the direction of the arrow.
		 Installation: Using the drift punch, drive the ABS measuring ring evenly up to the stop on the rear wheel hub.
			*745589011500
3	Install in the reverse order

Drift punch

745 589 01 15 00