ar4230t0160b

Remove/install ABS measuring ring

Type ar · emne 42.30 · version 0101 · 2005-07-12

Gælder for: MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990 MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996 MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.30 Antiblokeringssystem (ABS) — Serie 613 (modeller 355, 358, 388, 455, 485)

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.12 Sensor/kontakt/ledningssæt — Serie 613 (modeller 355, 358, 388, 455, 485)

Gælder også for motorer/gearkasser: 739 234, 745 990, 745 996, 745 997

AR42.30-T-0160B

Remove/install ABS measuring ring

7.2.00

MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990

MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996

MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

Remove/install ABS measuring ring

T42.30-0014-01

Illustration of front axle 739.234

Remove, Install

1

Remove rear wheel hub

AR35.20-T-0310B

2

Remove front wheel hub

AR33.20-T-0310B

3

Drive ABS measuring ring from wheel hub evenly in the direction of the arrow with a brass punch

Installation:

Drive measuring ring evenly onto wheel hub up to the stop with a plastic mallet. For the rear wheel hub, the drift must be used.

*745589011500

4

Install in the reverse order

Remove/install ABS measuring ring

Drift punch

745 589 01 15 00

Henviste dokumenter