AR42.30-D-8550A | Remove/install ABS control unit | 27.4.12 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB0) Antilock brake system (ABS)
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB3) Electronic Stability Program
D42.45-0011-06
1 Hydraulic unit
2 ABS control unit
3 Clutch
4 Cap
5 Internal Torx bolt
D42.45-0012-01
Tightening procedure
5 Internal Torx bolt
| Remove/install | ||
| Important notes concerning repair work on the antilock brake system (ABS) | Model 638, 901, 902, 903, 904, 905 with code BB0 or BB3 | |
| Notes on replacing ABS/ABD or ABS/ETS control unit | Model 638, 901, 902, 903, 904, 905 with code BB0 or BB3 | |
| Specifications for control unit | It is absolutely essential to observe all the notes and instructions in the accompanying information on the control unit! | |
1 | Ignition OFF | ||
2 | Pull cover cap (3) off ABS control unit (2) | ||
3 | Release connector (3) and disconnect from ABS control unit (2) | ||
4 | Unscrew bolts (5) at control unit | Installation: Replace bolts (5). Tightening procedure must be followed when inserting and tightening bolts. | |
5 | Detach ABS control unit (2) from hydraulic unit (1) to the front | Installation: The sealing surface on the hydraulic unit must be free of dust, grease and dirt. | |
6 | Install in the reverse order | ||
7 | Perform quick test | STAR DIAGNOSIS | |
8 | Parameterize ABS control unit | STAR DIAGNOSIS Menu item: Control unit adaptations |
Hydraulic unit
Henviste dokumenter
- ah4230n000201a Vigitge oplysninger om reparationsarbejde på antiblokeringssystem (ABS)
- ah4230n860104a Bemærkninger til udskiftning af styreenhed ABS/ABD eller ABS/ETS