Remove/install ABS measuring ring · ar4230b0160b · Mercedes-Benz WIS

AR42.30-B-0160B

Remove/install ABS measuring ring

12.02.16

Vehicle 364.### #C, 364.### #B, 364.### #D, 382.1## #C, 382.1## #B, 382.1## #D, 386.### #C, 386.### #B, 386.### #D, 388.### #C, 388.### #B, 388.### #D

Vehicle 634.0## #C, 634.0## #B, 634.0## #D, 660.### #C, 660.### #B, 660.### #D, 664.### #C, 664.### #B, 664.### #D, 695.### #C, 695.### #B, 695.### #D

B35.20-0021-01

1 Wheel hub

2 ABS tooth ring

3 Brake shoe support

4 Axle stub

5 Fastening sleeve

6 ABS sensor

	Remove and install
1	Remove the rear wheel hub (1)		AR35.20-B-0310A
2	Remove the splash guard from the wheel hub (1).		*055589191500
3	Remove the tooth ring (2) from the wheel hub (1)	Installing: Install the ring in cold condition. Measure lateral run out.	*BE42.30-B-1001-01A
4	Install in reverse order

Antilock brake system (ABS)

Número	Denominação		Rear axle 739.39


BE42.30-B-1001-01A	Maximum lateral deviation of the toothed ring of the ABS/ASR system	mm	0.15

055 589 19 15 00

Installation device

Henviste dokumenter

ar3520b0310a
ar3520b0310a