ar4230b0150a

Remove/install ABS sensor

Type ar · emne 42.30 · version 0301 · 2016-02-12

Gælder for: Vehicle 382.1 with CODE B02 (Anti-lock braking system (ABS))Vehicle 693.1 with CODE B02 (Anti-lock braking system (ABS))Vehicle 695.0 with CODE B02 (Anti-lock braking system (ABS))Vehicle 695.3 with CODE B02 (Anti-lock braking system (ABS))Vehicle 696.0 with CODE B02 (Anti-lock braking system (ABS))

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.30 Antiblokeringssystem (ABS) — Serie 382 (modeller 1**) · Serie 693 (modeller 1**) · Serie 695 (modeller 0**, 3**) · Serie 696 (modeller 0**)

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.12 Sensor/kontakt/ledningssæt — Serie 382 (modeller 1**) · Serie 693 (modeller 1**) · Serie 695 (modeller 0**, 3**) · Serie 696 (modeller 0**)

AR42.30-B-0150A

Remove/install ABS sensor

12.02.16

Vehicle 382.1 with CODE B02 (Anti-lock braking system (ABS))

Vehicle 693.1 with CODE B02 (Anti-lock braking system (ABS))

Vehicle 695.0 with CODE B02 (Anti-lock braking system (ABS))

Vehicle 695.3 with CODE B02 (Anti-lock braking system (ABS))

Vehicle 696.0 with CODE B02 (Anti-lock braking system (ABS))

Remove/install ABS sensor

B42.30-1053-04

1 ABS sensor

2 Brass bushing

Remove and install

1

Remove ABS sensor (1) from the front axle

Do not pull ABS sensor (1) through cables.

Install: Lubricate ABS sensor (1) and insert it in metal bush (2).

Caution: Install the black connector in left side and the orange ones in right side of the axle.

2

Remove the rear wheel hub

AR35.20-B-0310F

3

Remove ABS sensor (1) from rear axle

Do not pull ABS sensor (1) through cables.

Install: Lubricate ABS sensor (1) and insert it in metal bush (2).

Caution: Install the black connector in left side and the orange ones in right side of the axle.

4

Remove brass bushing (2)

Install: After cleaning up its housing apply a new bushing.

5

Install in reverse order

Henviste dokumenter