Remove/install front brake cable

AR42.20-P-0520A

Remove/install front brake cable

21.6.94

12.12.02

Notes on safety for lifting platform, included for the first time

AS00.00-Z-0010-01A

12.12.02

Check version of pedal assembly, included for the first time

Step 12.1

BT42.20-P-0510-01A

 

Remove/Install

Danger!

Lethal injuries are possible if vehicle slips off of lifting platform

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1.1

Carefully lower transmission with engine support

 The motor must not touch the partition wall.

Model 140 with engine 120

AR22.10-P-1160AO

Model 140 with engine 603

AR22.10-P-1160HW

Model 140 with engine 606

AR22.10-P-1160HB

2.1

Remove cover panel (12i) under rear seat cushion

Models 202, 208, 210

2.2

Remove heat shield of exhaust system.

Models 129, 140

3

Pre-tension automatic cable slack adjuster

Model 140

AR42.20-P-0520-01A

Models 202, 208, 210

AR42.20-P-0520-01B

4

Detach return spring (94)

5

Slacken adjusting screw (89)

Model 129

6

Detach brake cable (85) at intermediate lever of cable slack adjuster (91) and at vehicle floor

 Use snap-release tool (043). The brake cable (85) can also be removed by breaking the clamping ring (84). To install, insert a new clamping ring in the groove in the brake cable (85).

Snap-release tool

*129589116300

7

Remove cover below instrument panel

Model 129

ra68001290150x

Model 140

ra68001400150x

Model 202

AR68.10-P-1500E

Model 208

AR68.10-P-1500K

Model 210

AR68.10-P-1500F

8

Remove front left floor covering

Model 129

Model 140

Model 202

AR68.20-P-2050E

Model 208

Model 210

AR68.20-P-2050F

9

Detach brake cable (85) from parking brake pedal (75)

 Use snap-release tool (043).The brake cable (85) can also be removed by breaking the clamping ring (84). To install, insert a new clamping ring in the groove in the brake cable (85).

Pay attention to the rubber grommet (85b).

*129589116300

10

Install in the reverse order

11.1

Relieve load on automatic slack adjuster.

Models 140, 202, 208, 210

AR42.20-P-0520-02A



Inspecting

12.1

Check version of pedal assembly

Model 129



Parking brake pedal assembly modified

BT42.20-P-0510-01A

13.1

Adjust parking brake

Model 129

AR42.20-P-0540A