ar4220d054001f

Adjust parking brake cables

Type ar · emne 42.20 · version 0100 · 2013-06-27

Gælder for: MODEL 909

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.20 Parkeringsbremse — Serie 909

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.16 Parkeringsbremse › 21.16.32 bremsearm/bremsekabeltræk/omstyring/bremsepedal — Serie 909

AR42.20-D-0540-01F

Adjust parking brake cables

MODEL

909

Parking brake

Number

Designation

MODEL 909

BA42.20-N-1002-01A

Bolt, pressure transformer unit for brake cables to frame crossmember

Nm

25

Adjust parking brake cables
Adjust parking brake cables

1

Loosen but do not remove bolts (1) of mounting console (2).


2

Insert a Ø 6 mm drill bit or a 6 mm Allen wrench between mounting console (2) and front lever (3).

D42.20-0010-01

D42.20-0008-01

Adjust parking brake cables
Adjust parking brake cables

3

Push mounting console (2) back until front brake cable (4) is free of play and tension.


4

Tighten bolts (1) of mounting console (2) .


5

Remove drill bit or Allen wrench.


6

Pull up hand brake lever by one notch.

D42.20-0009-01

D42.20-0007-01

Adjust parking brake cables
Adjust parking brake cables

7

Tension eccentric clockwise until it is just still possible to turn wheels/brake disks by hand.


8

Tighten clamp bolt (5).


9

Release hand brake lever.


10

Check that wheels of rear axle can rotate freely.

D42.20-0029-01

D42.20-0005-01