Remove/install rear brake control cable

AR42.20-D-0525TSB

Remove/install rear brake control cable

19.04.2018

Model

907

with code IT5 (5.0 tonner)

except code B25 (Electric parking brake)

Shown on left side of vehicle

1

Brake cable

2

Cover

3

Bolts

4

Crossmember

5

Cable tie

6

Safety clip

7

Electrical lines

8

Brake cable lock

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on repairs to brake system

AH42.00-P-0003-01A

 

Remove/install

1

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

2

Remove respective brake cable (1) from brake compensator lever.

AR42.20-D-0520-06TS

3

Expose brake cable (1) to electric lines (7).

 Detach cable ties (5).

 The number of electric lines (7) and the cable ties (5) can vary.

 Installation: Replace cable ties (5).

4

Remove bolts (3) and remove cover (2).

5

Remove safety clip (6).

6

Remove brake cable (1) from brake cable lock (8).

7

Remove brake cable (1) from crossmember (4).

 To do so, unclip brake cable (1).

 Sleeve

*906589001400

8

Remove brake cable (1).

 Installation:
Route brake cable (1) free of tension and chafing.
Otherwise brake cable (1) may be damaged.

 To do so, route brake cable (1) out of holders (arrows).

9

Install in the reverse order

10

Adjust parking brake.

AR42.20-D-0540TS