ar4215t001002aa

Adjusting control arm at linkage adjuster

Type ar · emne 42.15 · version 0103 · 2005-08-23

Gælder for: MODEL NMB671 with REAR AXLE 748.12 /13

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.15 Mekanik — Serie 671

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 671

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 671

Gælder også for motorer/gearkasser: 748 12*, 748 13*

AR42.15-T-0010-02AA

Adjusting control arm at linkage adjuster

Brake mechanical system

Number

Designation

Model 671
with rear axle
748.12/13

BA42.15-N-1002-01D

Control arm of automatic adjuster to fixing piece

Nm

23

Adjusting control arm at linkage adjuster

Torque wrench

000 589 64 21 00

Adjusting control arm at linkage adjuster

T42.10-0040-01

1 Press control arm of automatic adjuster in operating direction of linkage adjuster up to the final position and tighten the bolt .

Do not stress the control arm of the automatic adjuster. Adjust the distance between the fixing piece and control arm by means of a suitable spacer washer. A washer must be inserted between the bolt head and control arm.