Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 963 · Serie 964
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 963 · Serie 964
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 963 · Serie 964
Gælder også for motorer/gearkasser: 749 126
AR42.10-W-0220-02D
Install brake disk
MODEL
963, 964 with REAR AXLE 749.126
Modification notes
12.2.14
Bolt, brake disk to wheel hub (DNA)
BA42.10-N-1004-22A
Disk brake
Number
Designation
MODEL 963, 964
BA42.10-N-1004-22A
Bolt, brake disk to wheel hub (DNA)
M141.5
Stage 1
Nm
60
Stage 2
°
80
During installation, there must be no dirt or corrosion residue between the brake disk and wheel hub. Otherwise when the bolts are tightened they may be distorted, which in turn could cause the brake disk to tear or fracture.
1
Clean contact surfaces (A) and centering seats (B) on brake disk (1) and wheel hub (2).
First clean with a wire brush, then smooth with emery cloth and continue wiping with a rag. Do not grease contact surfaces (A) and centering seats (B). New components must be cleaned on the contact surfaces (A) and centering seats (B) and be free of grease.
W42.10-1391-05
2
Position brake disk (1) on wheel hub (2) and tighten new bolts (3) finger-tight.
The wheel hub (1) must be fitted flush with the brake disk (2) and must not be tilted.
