ar4210w0182nc
Adjust clearance on drum brake of front axle
Type ar · emne 42.10 · version 0100 · 2018-09-08
Gælder for: Model 967 with front axle 731.701
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 967
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 967
Gælder også for motorer/gearkasser: 731 701
AR42.10-W-0182NC
| Adjust clearance on drum brake of front axle
| 01.08.2018
|
Model
| 967 with front axle 731.701
|
|
| Adjust
|
|
|
1
| Remove brake drum.
|
| AR42.10-W-1011NC
|
2
| Insert an adjustment panel between the brake shoe and the wedge unit on both sides.
|
|
|
| Adjusting plates for adjusting the wedge unit
|
| WF58.50-N-4210-06NA
|
|
|
| The angled side of the adjustment panel must point towards the wedge unit in each case.
|
|
3
| Turn at each adjustment screw until the angled sides of the adjustment panels make contact with the housing of the wedge unit (arrows).
|
|
|
4
| Remove adjustment panels.
|
|
|
5
| Install brake drum.
|
| AR42.10-W-1011NC
|
Henviste dokumenter
