Check bellows on thrust pieces

Type ar · emne 42.10 · version 0201 · 2010-02-18

Gælder for: MODEL 934.2, 944.2 with disk brake SN 5000 MODEL 970, 972, 974, 975, 976 with SB 5000, SN 5000 disk brakes

Ikke tilgængelig på “da”; vises på Engelsk.

AR42.10-W-0130B

16.2.10

MODEL 934.2, 944.2
with disk brake SN 5000

MODEL 970, 972, 974, 975, 976
with SB 5000, SN 5000 disk brakes

W42.10-0096-01

Shown: disk brake SB 5000

1 Thrust piece

2 Bellows

	Remove
1	Remove brake pads		AR42.10-W-0170B
	Checking
2	Check adjusting thread of threaded tubes for corrosion		AR42.10-W-0200-02B
3	Check bellows (2) for signs of damage and correct seating of thrust piece (1)	 Penetration of dirt and moisture lead to corrosion and impairs the slack adjuster functionality.
		 If necessary, replace the bellows: 
		Remove/install boot.	AR42.10-W-0200B
	Install
4	Turn thrust piece (1) counterclockwise all way in by way of the brake adjuster with the adapter
5	Install brake linings		AR42.10-W-0170B
6	Check function and effectiveness of service brake

ar4210w0170b
ar4210w020002b
ar4210w0200b Af-, påmontering af trykstykke med manchet ved monteret bremsekaliber