ar4210t1040c

Remove/install brake linings

Type ar · emne 42.10 · version 0102 · 2006-07-26

Gælder for: MODEL 613.364 /365 with HOSE rear axle for O560

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 613 (modeller 364, 365)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 613 (modeller 364, 365)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 613 (modeller 364, 365)

AR42.10-T-1040C

Remove/install brake linings

24.10.05

MODEL 613.364 /365
with HOSE rear axle for O560

Remove/install brake linings

T42.10-0031-11

1 Rivet

2 Brake pad

3 Brake shoe

Removing

1

Remove brake shoes

AR42.10-T-1020C

2

Drill closing heads of rivets (1) and remove brake linings (2) from the brake shoes (3)

The brake linings (2) of all brake shoes (3) of the rear axle should always be replaced.

Install

3

Check contact surface of brake linings (2) on brake shoes (3)

If the contact surface of the brake linings (2) is not OK the brake shoes (3) should be reworked or replaced.

4

Replace the brake linings (2) and rivet onto the brake shoes (3)

Guidelines for riveting brake linings

AH42.10-N-0006-01A

*WH58.30-Z-1004-29A

*WH58.30-Z-1006-29A

*WH58.30-Z-1006-29A

5

Install in the reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1004-29A

Riveting nut pliers

WH58.30-Z-1006-29A

Riveting machine, pneumatic

Henviste dokumenter