ar4210t1040aa

Remove/install brake linings

Type ar · emne 42.10 · version 0103 · 2006-07-26

Gælder for: MODEL NMB671 with REAR AXLE 748.12 /13

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 671

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 671

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 671

Gælder også for motorer/gearkasser: 748 12*, 748 13*

AR42.10-T-1040AA

Remove/install brake linings

24.10.05

MODEL NMB671 with REAR AXLE 748.12 /13

Remove/install brake linings

T42.10-0031-11

1 Rivet

2 Brake pad

3 Brake shoe

Removing

1

Remove brake shoes (3)

AR42.10-T-1020AA

2

Drill the closing heads of the rivets (1)

The brake linings (2) of all brake shoes (3) of an axle should always be replaced.

3

Detach brake linings (2) from the brake shoes (3)

Checking

4

Check contact surface of brake linings (2) on brake shoes (3)

Worn brake shoes (3) should be replaced.

Install

5

Rivet new brake linings (2) onto the brake shoes (3)

Guidelines for riveting brake linings

All models

AH42.10-N-0006-01A

Notes on running in new brake pads/linings

All models

AH42.10-N-0008-01AA

*WH58.30-Z-1004-29A

*WH58.30-Z-1006-29A

*WH58.30-Z-1006-29A

6

Install brake shoes (3)

AR42.10-T-1020AA

Commercially available tools

Number

Designation

WH58.30-Z-1004-29A

Riveting nut pliers

WH58.30-Z-1006-29A

Riveting machine, pneumatic

Henviste dokumenter