ar4210t020001ba
Remove thrust piece with bellows
Type ar · emne 42.10 · version 0100 · 2006-07-26
Gælder for: MODEL NMB613.358 /388 with REAR AXLE 746.217
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 613 (modeller 358, 388)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 613 (modeller 358, 388)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 613 (modeller 358, 388)
Gælder også for motorer/gearkasser: 746 217
AR42.10-T-0200-01BA
| Remove thrust piece with bellows
|
|
|
Commercially available tools
Number
| Designation
|
|
WH58.30-Z-1004-14A
| Pressing off fork for pressing the thrust piece off the threaded tube,
Firma Knorr D-80809 München
|
|
1 Carefully drive in screwdriver (4) only approx. 4 mm, deform seat ring of bellows (5) and pry bellows (5) from seat.
Do not damage inner seal cap or seat of the bellows (5).
2 Use the removal fork (1) to press the thrust piece (2) with bellows (5) from the threaded pipe (3).
The flat side of the removal fork (1) must face the threaded pipe (3).
