ar4210t0010u

Bleed brake system

Type ar · emne 42.10 · version 0104 · 2010-01-19

Gælder for: MODEL 436.330

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 436 (modeller 330)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.5 bremsesystem komplet — Serie 436 (modeller 330)

AR42.10-T-0010U

Bleed brake system

17.12.09

MODEL 436.330

Bleed brake system

T42.10-0046-01

1 Front axle brake fluid reservoir

2 Rear axle brake fluid reservoir

Bleed brake system

T42.00-0010-01

Illustration of rear axle brake caliper:

3 Bleed valve

4 Wheel brake cylinder

Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Brake fluid notes

AH42.50-P-0001-01A

Notes on repairs to brake system

AH42.00-P-0003-01A

1

Mark brake fluid level of brake fluid reservoir (1, 2).

2

Unscrew cap from brake fluid reservoir (2).

3

Connect filler and bleeder unit to brake fluid reservoir (2). Apply the specified pressure to the brake system

Pay attention to manufacturer's operating instructions.

(pneumatic)

(electric)

Brake fluid as per Specifications for Operating Fluids

Brake fluids (DOT 4 plus)

Sheet 331.0

BB00.40-P-0331-00A

4

Connect bleed hose of brake fluid receptacle to

bleed valves (3) of

wheel brake cylinder (4).

5

Open and close right rear and left rear bleed valves (3) in sequence.

Close valves when brake fluid runs out free of bubbles.

6

Disconnect filler and bleeder unit

Pay attention to manufacturer's operating instructions.

7

Correct the brake fluid level in brake fluid reservoir (2).

Produce the marked brake fluid level again.

Risk of contaminating brake fluid; ensure scrupulous cleanliness when topping up brake fluid.

8

Screw on cap of brake fluid reservoir (2).

9

Unscrew cap of brake fluid reservoir (1).

10

Carry out steps 3 to 8 for bleeding front axle brake system analogously.

11

Check leaktightness of brake system

Henviste dokumenter