ar4210p1030ff

Disassemble/assemble brake shoes

Type ar · emne 42.10 · version 0102 · 2006-03-28

Gælder for: MODEL 454.0 except CODE (30Y) Disk brakes on rear axle

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 454 (modeller 0**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 454 (modeller 0**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 454 (modeller 0**)

AR42.10-P-1030FF

Disassemble/assemble brake shoes

20.3.06

MODEL 454.0 except CODE (30Y) Disk brakes on rear axle

Disassemble/assemble brake shoes

P42.10-2520-08

1 Spring

2 Brake shoe

3 Spring

4 Spring

8 Star wheel

9 Thrust sleeve

10 Thermo clip

5 Brake shoe

6 Adjusting lever

7 Threaded thrust rod

Disassemble/assemble brake shoes

P42.10-2519-11

1 Spring

2 Brake shoe

3 Spring

4 Spring

5 Brake shoe

6 Adjusting lever

11 Automatic adjuster

Disassemble/assemble

1

Remove brake shoes (2, 5) from rear axle

AR42.10-P-0165FF

2

Detach and remove spring (3) from brake shoes (2, 5)

3

Detach spring (4) from adjusting lever (6) and from brake shoe (5) and remove

4

Turn adjusting lever (6) slightly counterclockwise, detach from lower guide on brake shoe (5) and remove

Assembly: Adjusting lever (6) must be positioned between threaded thrust rod (7) and brake shoe (5). Adjusting lever (6) must engage in star wheel (8).

5

Detach spring (1) and remove

Assembly: To facilitate attachment of the spring (1), attach the automatic adjuster (11) to the brake shoes (2, 5) using the spring (1).

6

Disassemble automatic adjuster (11)

Assembly: Locking pin of thermo clip (10) must engage in recess on thrust sleeve (9). Before assembly, screw star wheel (8) completely onto threaded thrust rod (7).

7

Assemble in the reverse order

Henviste dokumenter