ar4210p0305mb

Remove/install brake booster hydraulic unit pressure reservoir

Type ar · emne 42.10 · version 0102 · 2019-09-18

Gælder for: Model 220.175/176/178 with code Z07 (B7 armoring on special protection version)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 220 (modeller 175, 176, 178)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.30 hovedbremsecylinder/beholder/bremsekraftforstærker — Serie 220 (modeller 175, 176, 178)

AR42.10-P-0305MB

Remove/install brake booster hydraulic unit pressure reservoir

18.09.2019

Model

220.175/176/178

with code Z07 (B7 armoring on special protection version)

Remove/install brake booster hydraulic unit pressure reservoir

P42.10-2142-08

1

Water repellent piece

2

Pressure reservoir

Remove/install

Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Brake fluid notes

AH42.50-P-0001-01A

Notes on repairs to brake system

AH42.00-P-0003-01A

1

Switch off ignition

2

Reduce pressure in pressure reservoir (2)

Fully depress brake pedal 30 times as far as the stop.

3

Remove wiper arms

AR82.30-P-6100M

4

Remove water repellent (1)

Fastened with 4 expansion rivets.

5

Unscrew pressure reservoir (2).

Installation: lubricate pre-mounted sealing ring (arrow) with brake fluid.
Screw in pressure reservoir (2) by hand and then tighten.

Pressure reservoir to brake booster hydraulic unit

*BA42.50-P-1007-01B

6

Install in the reverse order

7

Bleed brake system

AR42.10-P-0010MB

Brake system - hydraulics

Number

Designation

Model 220 with Code Z07

BA42.50-P-1007-01B

Pressure reservoir to brake booster hydraulic unit

Nm

40

Henviste dokumenter