ar4210p0304mb
Remove/install motor-and-pump assembly pressure reservoir
Type ar · emne 42.10 · version 0102 · 2019-09-18
Gælder for: Model 220.175/176/178 with code Z07 (B7 armoring on special protection version)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 220 (modeller 175, 176, 178)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.30 hovedbremsecylinder/beholder/bremsekraftforstærker — Serie 220 (modeller 175, 176, 178)
AR42.10-P-0304MB
| Remove/install motor-and-pump assembly pressure reservoir
| 18.09.2019
|
Model
| 220.175/176/178
|
|
| with code Z07 (B7 armoring on special protection version)
|
1
| Motor/pump unit
|
2
| Pressure reservoir
|
| Remove/install
|
|
|
1
| Remove motor/pump unit (1)
|
| AR42.10-P-0303MB
|
2
| Unscrew pressure reservoir (2).
| Installation: lubricate pre-mounted sealing ring (arrow) with brake fluid.
Screw in pressure reservoir (2) by hand and then tighten.
|
|
|
|
| Pressure reservoir to engine pump unit
| *BA42.50-P-1006-01B
|
3
| Install in the reverse order
|
|
|
Brake system - hydraulics
|
Number
| Designation
|
| Model 220 with Code Z07
|
BA42.50-P-1006-01B
| Pressure reservoir to engine pump unit
| Nm
| 40
|
Henviste dokumenter
