Remove/install brake light switch

AR42.10-D-0042TS

Remove/install brake light switch

18.06.2018

Model

907, 910

1

Stop lamp switch

2

Mounting clip

3

Bracket

4

Sensor plate

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Disconnect electrical connector of brake light switch (1).

2

Remove brake light switch (1) from retaining clip (2).

 To do so, press out brake light switch (1) toward rear.

3

Remove retaining clip (2) from holder (3).

 To do so, press together locks at side.



Install

4

Attach retaining clip (2) to holder (3).

 Check retaining clip (2) for damage.

If corresponding findings are present,



replace brake light switch (1).

5

Connect electrical connector of brake light switch (1).

6

Install brake light switch (1) into retaining clip (2).

7

Adjust air gap (arrow).

 To do so, position feeler gauge between brake light switch (1) and sensor plate (4) of brake pedal. It must be possible to move the feeler gauge snugly between the two components.

 Commercially available devices/tools
Feeler gage

 Do not operate brake pedal.

Clearance between brake lights switch and brake pedal sensor plate

*BE42.10-N-1019-10A

If the feeler gauge cannot be positioned snugly:



Slide brake light switch (1) backwards or forwards by an engagement and reposition feeler gauge between brake light switch (1) and sensor plate (4) of brake pedal.

Test and adjustment values for service brake

Number

Designation

Model 907

Model 910

BE42.10-N-1019-10A

Clearance between brake lights switch and brake pedal sensor plate

mm

1

1