ar4210b020002ta
Check adjusting thread of threaded tubes for corrosion
Type ar · emne 42.10 · version 0114 · 2017-10-27
Gælder for: Model 934.241/251, 958.20/25/43/44/45 with code BB5 (Disc brakes on front and rear axle)
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 934 (modeller 241, 251) · Serie 958 (modeller 20*, 25*, 43*, 44*, 45*)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 934 (modeller 241, 251) · Serie 958 (modeller 20*, 25*, 43*, 44*, 45*)
EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 934 (modeller 241, 251) · Serie 958 (modeller 20*, 25*, 43*, 44*, 45*)
AR42.10-B-0200-02TA
| Check adjusting thread of threaded tubes for corrosion
|
|
|
Model
| 934.241/251, 958.20/25/43/44/45
|
|
| with code BB5 (Disc brakes on front and rear axle)
|
1
| Insert a new brake pad (1) in the outer span the brake carrier.
|
|
| The brake pad (1) limits the adjustment travel and prevents the total output of the threaded tubes (3).
|
2
| Approach the threaded tubes (3) to the brake disc (2) with the regulator.
|
3
| Check the regulating threads for humidity, corrosion and/or damage.
|
|
| If there is humidity, corrosion and/or damage in the adjusting threads:
|
|
|
|
|
| Replace the brake caliper.
|
