Remove/install propeller shaft intermediate bearing and replace grooved ball bearing

AR41.10-P-0100MSA

18.12.2018

Model	257 with engine 256, 264
Model	290 with engine 256

Remove/install propeller shaft intermediate bearing and replace grooved ball
bearing

1	Front half of propeller shaft
2	Rear half of propeller shaft
4	Sealing bellows
7b	Elastomer bearing
8	Deep-groove ball bearing

P41.10-2002-11

	Remove
1	Remove propeller shaft.	Model 290 with engine 256	AR41.10-P-0050MNI
		Model 257 with engine 256, 264	AR41.10-P-0050MSA
2	Mark front half of propeller shaft(1) relative to rear half of propeller shaft(2).
3	Disconnect front half of propeller shaft(1) and rear half of propeller shaft(2) at sliding piece connection.
4	Detach seal bellows(4) from front half of propeller shaft(1).
5	Detach elastomer bearing(7b) together with deep-groove ball bearing(8) from rear half of propeller shaft(2).		AR41.10-P-0100-07MSA
		 Puller arms	*129589003400
		 Puller, two-arm	*000589883300
6	Press deep-groove ball bearing(8) out of elastomer bearing(7b).		AR41.10-P-0100-03MSA
		 Removal and installation tool	*116589094300
	Install
7	Press deep-groove ball bearing(8) into elastomer bearing(7b).		AR41.10-P-0100-03MSA
		 Removal and installation tool	*116589094300
8	Press elastomer bearing(7b) together with deep-groove ball bearing(8) onto joint fork of rear half of propeller shaft(2).		AR41.10-P-0100-05MSA
		 Drift	*126589031500
9	Check seal bellows(4) for damage and leak tightness.	If a complaint has been submitted,
		
		Install new seal bellows (4).
10	Fit seal bellows(4) onto front half of propeller shaft(1).
11	Press front half of propeller shaft (1) and rear half of propeller shaft (2) together.		AR41.10-P-0050-05MSA
		 When fitting the propeller shaft halves (1, 2) together, make sure that the marks line up with each other.
		Long-life grease	*BR00.45-Z-1001-06A
12	Install propeller shaft.	Model 290 with engine 256	AR41.10-P-0050MNI
		Model 257 with engine 256, 264	AR41.10-P-0050MSA

000 589 88 33 00

Puller, two-arm

129 589 00 34 00

Puller arms

126 589 03 15 00

Drift

116 589 09 43 00

Removal and installation tool

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11

Henviste dokumenter