Read out propeller shaft inclination angles from memory; correct if necessary · ar4110p008601msa · Mercedes-Benz WIS

AR41.10-P-0086-01MSA	Read out propeller shaft inclination angles from memory; correct if necessary
	000 588 04 19 00 Articulation angle inclinometer	WS26.00-P-0140B
	Data Sheet for Measuring Inclination Angle, Form	OF41.10-P-3000-01A

Model

257

Check values for propeller shaft articulation angle

Number	Designation		Model 257 Except AMG	Model 257 AMG
BE41.10-P-1001-01G	Front inclination angle of transmission relative to front propeller shaft (1)	°	-0,50...+0,67	+0,00…+0,80

Check values for propeller shaft articulation angle

Number	Designation		Model 257 Except AMG	Model 257 AMG
BE41.10-P-1002-01G	Inclination angle of front propeller shaft relative to rear propeller shaft (2)	°	+0,00...+1,00	+0,70…+1,30

Check values for propeller shaft articulation angle

Number	Designation		Model 257 Except AMG	Model 257 AMG
BE41.10-P-1003-01G	Rear inclination angle of rear propeller shaft relative to rear axle differential (3)	°	-1,00...-0,17	-1,10…-0,50

Read out propeller shaft inclination angles from memory; correct if necessary

 The display indicates that the meter is ready to measure angle 5. This angle is no longer measured.

1	Press MEMORY button on articulation angle meter once.

 The main menu appears.

2	Press the MEMORY button again.

 The memory displays the measured angles (a, b, d) and the resulting articulation angle 1 (c) and articulation angle 2 (e).

3	Record inclination angle 1 (c) e.g. +0.26° and inclination angle 2 (e) e.g. +0.58° on the data sheet.

4	Press the STEP button.

Memory display message

P41.10-2083-01

 The measured angles (d, f) and the calculated articulation angle 3 (g) are displayed.

5	Record inclination angle 3 (g) e.g. –0.08° on the data sheet.

Memory display message

P41.10-2084-01

Calculate the inclination angles from the differences between the respective angle measurements.
Articulation angle 1:
Transmission to front half of propeller shaft .
Inclination angle 2:
Front half of propeller shaft to rear half of propeller shaft .
Articulation angle 3:
Rear half of propeller shaft to rear axle differential .

 If a value is outside of the tolerance, it must be corrected. All articulation angle differences should be approximately in the center of the relevant tolerance range.
A check measurement must be carried out after each inclination angle correction.

P41.10-2055-04