Remove/install boot on propeller shaft of front axle gear

Type ar · emne 41.10 · version 0114 · 2018-12-08

Gælder for: Model 203.081/084/087/092/281/284/287/292, 210.08/28, 211.08/09/28/29, 220.083/084/087/183/184/187 Model 205 with transmission 722.96/97 Model 205, 213, 217, 218, 222, 238, 253, 290 with transmission 725.0 with code M005 (4MATIC) Model 212, 217, 218, 222 with transmission 722.96/97 Model 253 with transmission 724.2

Ikke tilgængelig på “da”; vises på Engelsk.

AR41.10-P-0070-01A	Remove/install boot on propeller shaft of front axle gear
	Long-life grease (NLGI grade 2)		BB00.40-P-0266-02A

Model	203.081/084/087/092/281/284/287/292, 210.08/28, 211.08/09/28/29, 220.083/084/087/183/184/187
Model	205 with transmission 722.96/97
Model	205, 213, 217, 218, 222, 238, 253, 290 with transmission 725.0
	with code M005 (4MATIC)
Model	212, 217, 218, 222 with transmission 722.96/97
Model	253 with transmission 724.2

Remove

1	Pull universal joint (72) off propeller shaft (70).

2	Remove dust boot (71).

Install

3	Coat splined profile with long-life grease.

4	Slide dust boot (71) with universal joint (72) onto drive shaft (70).

 Pay attention to markings (arrows) for installation position.

5	Check that dust boot (71) is seated correctly.

P41.20-0201-01