Detach/attach flex disk of propeller shaft

AR41.10-P-0040-02MSC

Detach/attach flex disk of propeller shaft

Model

167

 Propeller shaft

Number

Designation

Model 167

BA41.10-P-1002-01F

Self-locking screw/bolt on rear propeller shaft/rear axle differential

Self-locking nut

Nm

-

Direct threaded connection

Stage 1

Nm

60

Stage 2

°

90

1

Mark position of propeller shaft (1) relative to flange of transmission, of differential or of transfer case with a colored marking.

2

Attach  counterholder to screws of flex disk (2).

 Aid of helper required.

3

Remove bolts (2a).

4

Remove  counterholder from flex disk (2).

Example illustration

1

Propeller shaft

2

Flex disk

2a

Bolts

5

Detach bushings of flex disk (2) from flange with drift as shown.

6

Pull propeller shaft (1) off flange of transmission, of transfer case or of rear axle differential.

 Carefully detach drive shaft (1).
Otherwise the pilot bushing in the drive shaft (1) may be damaged.

Shown by way of an example on flexible coupling (2) on rear axle differential

2

Flex disk

7

Restore original installation position of drive shaft(1) using colored marking.

8

Push propeller shaft (1) onto flange of transmission, of transfer case or of rear axle differential.

 Carefully slide on drive shaft(1).
Otherwise the pilot bushing in the drive shaft (1) may be damaged.

9

Attach  counterholder to screws of flex disk (2).

 Aid of helper required.

10

Screw-in bolts(2a). 

11

Remove  counterholder from flex disk (2).