Remove/install propeller shaft intermediate bearing

AR41.10-D-0101B

31.5.06

MODEL 901, 902, 903, 904, 905
Propeller shaft center support bearing at sliding piece

MODEL 690.6
Propeller shaft center support bearing at sliding piece

D41.10-0006-06

1 Rubber boot

2 Circlip

3 Protective cap

4 Propeller shaft intermediate bearing

5 Washer

6 Front propeller shaft

7 Rear propeller shaft

 	Remove/install
1	Remove propeller shaft	2-piece propeller shaft	AR41.10-D-0050B
		3-piece propeller shaft	AR41.10-D-0050C
2	Separate rubber boot (1) at the propeller shaft (7)
3	Separate propeller shaft (7) at sliding joint connection		AR41.10-D-0050-05A
		MB multipurpose grease	*BR00.45-Z-1017-06A
4	Remove rubber boot (1)	 Installation: Replace damaged rubber boot and ensure correct fit.	AR41.10-D-0101-01A
5	Remove circlip (2)		*WH58.30-Z-1008-02A
6	Pull off propeller shaft intermediate bearing (4) together with protective caps (3) and washer (5)		AR41.10-D-0101-02A
			*000589453300
			*366589021500
		 Installation	AR41.10-D-0101-03A
			*387589051500
7	Check propeller shaft intermediate bearing for wear	Replace parts if necessary.
8	Install in the reverse sequence

366 589 02 15 00

000 589 45 33 00

Puller

Drift

387 589 05 15 00

Drift

Commercially available tools

Number	Designation
WH58.30-Z-1008-02A	Circlip pliers for external circlip

Repair materials

Number	Designation	Order number
BR00.45-Z-1017-06A	MB multipurpose grease	A 001 989 34 51 11