ar4110d007002ad

Remove/install propeller shaft to front axle gear

Type ar · emne 41.10 · version 0100 · 2006-08-23

Gælder for: MODEL 670.4 with ENGINE 900.917 /918 with TRANSMISSION 712.613

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 41 Kardanaksel › 41.10 Kardanaksel — Serie 670 (modeller 4**) · Serie 900 (modeller 917, 918)

EinPAS 17 Drivstreng/aksel › 17.40 Kardanaksel › 17.40.30 Kardanaksel drivmekanisme/firehjulstræk — Serie 670 (modeller 4**) · Serie 900 (modeller 917, 918)

Gælder også for motorer/gearkasser: 712 613

AR41.10-D-0070-02AD

Remove/install propeller shaft to front axle gear

Propeller shaft

Number

Designation

Model
668.3, 670

BA41.10-N-1008-01D

Bolt for propeller shaft to front-axle drive flange

Nm

60

Remove/install propeller shaft to front axle gear

D41.10-1116-05

1 Remove propeller shaft (2) from transmission flange (3) of front-axle transmission (4).

The propeller shaft (2) is fastened using four bolts (1) to the transmission flange (3).

Installation: The transmission flange (3) and propeller shaft (2) are interlinked.

2 Tie up propeller shaft (2) to one side.

3 Install in the reverse order.

Shown on transmission 712.613 with power take-off