AR40.30-P-0401-01A | Adjusting fixtures for distance and comparison measurement according to the model concerned |
170 589 00 63 00
Mount
P40.30-2027-01
1 Align suspension (07) horizontal and adjust dimensions (see next picture) at the mounts (07r, 07s), see Table.
The suspension (07) enables the vehicle center to be displayed with the check point (K).
Shown on model 220 without 4MATIC
7 Mount
07r Left support
07s Right support
024b Retaining bolt with bubble level
K Reference point (centered)
P40.30-2028-11
06 Telescopic measuring rod
07n Threaded stud
07r Left support
07s Right support
024 Measuring tip
024b Retaining bolt with bubble level
a Specified adjustment dimension for left-side support
b Specified adjustment dimension for right-side support
Designation | Model 170 | Model 129 | Model 140 | Model 202 except engine 112, 113, model 208 except engine 112, 113 | Model 202 | Model 210 except 210.08/28 | ||
Dimension | a | mm | 80 | 66 | 59 | 83 | 70 | 76,5 |
b | mm | 363,5 | 374 | 381 | 365 | 373 | 375 | |
Designation | Model | Model 215, model 220 without 4MATIC | Model | ||
Dimension | a | mm | 59 | 73 | 73 |
b | mm | 480 | 372 | 497 | |