ar4020d032208b

Measure camber

Type ar · emne 40.20 · version 0103 · 2010-10-05

Gælder for: MODEL 667 with FRONT AXLE 730.4 /6 Meßgerät P 5 MODEL 668 with FRONT AXLE 730.6 Meßgerät P 5 MODEL 670 with FRONT AXLE 730.3 /6 /7 Meßgerät P 5'

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.20 Undervognsudmåling — Serie 667 · Serie 668 · Serie 670

EinPAS 20 Undervogn › 20.10 Undervognsudmåling › 20.10.20 diagnose/kontrol/udmåling/indstilling — Serie 667 · Serie 668 · Serie 670

Gælder også for motorer/gearkasser: 730 3**, 730 4**, 730 6**, 730 7**

AR40.20-D-0322-08B

Measure camber

Test values for front wheel alignment

Number

Designation

Model 667 with front axle 730.4/6

Model 668 with VA 730.6 front axle

Model 670 with front axle 730.6/7

BE40.20-N-1002-11D

Wheel camber

°

1° (20')

1° (20')

1° (20')

Test values for front wheel alignment

Number

Designation

Model 670 with VA 730.3 front axle

BE40.20-N-1002-11D

Wheel camber

°

1° (20')

Measure camber

L40.20-0047-01

1 Insert wheel alignment equipment (1) with bolt (4) into projector bracket (9).

2 Position measuring instrument horizontal relative to longitudinal axis of vehicle using spirit level and tighten thumb screw.

3 Turn knob "Camber" until the bubble level for camber measurement is at center.

Measuring

4 Read off value from scale for camber measurement at camber measuring point.

5 Perform camber measurement on other wheel of front axle in same way.

The dial for camber measurement is divided into the measuring ranges "Camber plus" and "Camber minus". The measuring range "Camber plus" ranges from 0° to +8° . The measuring range "Camber minus" ranges from 0° to -4° . One graduation line on the dial corresponds to 10'.