ar4020b034001a
Measure steering axis inclination
Type ar · emne 40.20 · version 0400 · 2020-05-26
Gælder for: Model 368.0/1, 382.111/123/15/17/18, 384.06/07/2/3, 386.0, 634.0 (except 634.08), 979.2
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.20 Undervognsudmåling — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 111, 123, 15*, 17*, 18*) · Serie 384 (modeller 06*, 07*, 2**, 3**) · Serie 386 (modeller 0**) · Serie 634 (modeller 00*, 01*, 06*, 07*) · Serie 979 (modeller 2**)
EinPAS 20 Undervogn › 20.10 Undervognsudmåling › 20.10.20 diagnose/kontrol/udmåling/indstilling — Serie 368 (modeller 0**, 1**) · Serie 382 (modeller 111, 123, 15*, 17*, 18*) · Serie 384 (modeller 06*, 07*, 2**, 3**) · Serie 386 (modeller 0**) · Serie 634 (modeller 00*, 01*, 06*, 07*) · Serie 979 (modeller 2**)
AR40.20-B-0340-01A
| Measure steering axis inclination
|
|
|
Model
| 368.0/1, 382.111/123/15/17/18, 384.06/07/2/3, 386.0, 634.0 (except 634.08), 979.2
|
31.01.2019
| Kingpin inclination
|
| BE40.20-B-1002-11B
|
07.05.2020
| Kingpin inclination
|
| BE40.20-B-1002-11B
|
Number
| Designation
|
| Vehicle 382.111
| Vehicles 634.011/012/014/081 with front axle 739.386/397
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicle 384.065
| Vehicles 384.061/069
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 979.276/277 with front axle 732.560
| Vehicles 382.155/156/158/171/181/187/189
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 9° 30' (30')
| 6° (30')
|
Number
| Designation
|
| Vehicles 384.071/074/075/076/078
| Vehicles 382.153/154/157/176/177/178/182/185/188
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicle 384.063
| Vehicle 384.223
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 368.100/104/106 with front axle 732.796
| Vehicle 384.067 with front axle 732.797
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 368.002/004 with front axle 739.916
| Vehicles 368.100/104 with front axle 739.916
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 6,25° (30')
| 6,25° (30')
|
Number
| Designation
|
| Vehicle 382.123
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
|
The divergence measuring procedure (expansion) depends on the equipment. Refer to the operating manual of the respective equipment to be utilized.
1
| Position the projector (5) with the fastening pin for measuring the expansion on the projector support (4)
|
2
| Turn the wheel to the left on the rotating plate (6) by angle (a)
|
3
| Place the projector (5) horizontally in vehicle longitudinal direction and tighten the wing screw
|
4
| Set the scale ring to measure the expansion (33) to zero on the wheel to be measured
|
5
| Turn the wheel to the right on the rotating plate (6) by angle (a)
|
6
| Turn the button (29) until the level is centered
|
7
| Read out the indicated value on the scale ring to measure the expansion (33)
For example:
"right wheel expansion" 5º.
|
8
| Record the measuring value on the alignment form
.
|
9
| Carry out the expansion measurement of the other wheel the same way
|
